Canon XF605 Instruction Manual - Page 71

Using the Handle Zoom Rocker You can set the zoom speed of the handle zoom rocker using the menu. 1 Set the ZOOM switch to ROCKER. 2 Move the zoom rocker toward T to zoom out (wide- angle) and toward S to zoom in (telephoto). Zoom 71 Handle zoom rocker: Approximate zoom speeds (time required to zoom end-to-end) [v Camera Setup] > [Handle Zoom Speed] [Low] [v Camera Setup] > [Zoom Speed Level] [Normal] [1] (slowest) 4 min 38 sec 2 min [16] (fastest) 4.2 sec 2.6 sec * When the zoom speed is too fast, it will be more difficult to focus while zooming. [High] 1 min 0.9 sec* Setting the Zoom Speed (Handle Zoom Rocker) 1 Select > [v Camera Setup] > [Zoom Speed Level] > Desired option (A 70). • The selected speed will also be applied to the handle zoom rocker. 2 Select > [v Camera Setup] > [Handle Zoom Speed] > Desired option. Using a Remote Controller You can operate the zoom using the RC-V100 Remote Controller or a commercially available remote control connected to the camera. The zoom speeds will differ depending on the controller. Zoom speeds for remote operation Accessory Zoom speed RC-V100 Remote Controller (optional) Variable speed: The greater the angle at which the RC-V100's ZOOM dial is rotated from the center, the faster the zoom. Commercially available remote controls If the remote control does not support variable zoom: Constant zoom speed. If the remote control supports variable zoom: Variable zoom according to the remote control's settings. Browser Remote Fastest constant zoom speed. See the values under [16] in the previous table. NOTES • When an RC-V100 Remote Controller is connected to the camera, you can zoom with the remote controller's ZOOM dial. At default settings, turn the dial right to zoom in and left to zoom out.