Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 105

ProSafe Managed Switch 802.1X Supplicant Commands 802.1X ("dot1x") supplicant functionality is on point-to-point ports. The administrator can configure the user name and password used in authentication and capabilities of the supplicant port. dot1x pae Use this command to set the port's dot1x role. The port can serve as either a supplicant or an authenticator. Format Mode dot1x pae {supplicant | authenticator} Interface Config dot1x supplicant port-control Use this command to set the ports authorization state (Authorized or Unauthorized) either manually or by setting the port to auto-authorize upon startup. By default all the ports are authenticators. If the port's attribute needs to be moved from or , use this command. Format Mode dot1x supplicant port-control {auto | force-authorized | force_unauthorized} Interface Config Term auto force-authorized forceunauthorized Description The port is in the Unauthorized state until it presents its user name and password credentials to an authenticator. If the authenticator authorizes the port, then it is placed in the Authorized state. Sets the authorization state of the port to Authorized, bypassing the authentication process. Sets the authorization state of the port to Unauthorized, bypassing the authentication process. no dot1x supplicant port-control Use this command to set the port-control mode to the default, auto. Default Format Mode Auto no dot1x supplicant port-control Interface Config Switching Commands 105