Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 236

ProSafe Managed Switch Term Definition Total Entry Count Current / Peak The total entries in the ARP table and the peak entry count in the ARP table. Static Entry Count Configured/Active / Max The static entry count in the ARP table, the active entry count in the ARP table, the active entry count in the ARP table, and maximum static entry count in the ARP table. The following are displayed for each ARP entry: Term IP Address MAC Address Interface Type Age Definition The IP address of a device on a subnet attached to an existing routing interface. The hardware MAC address of that device. The routing unit/slot/port associated with the device ARP entry. The type that is configurable. The possible values are Local, Gateway, Dynamic and Static. The current age of the ARP entry since last refresh (in hh:mm:ss format ) show arp brief This command displays the brief Address Resolution Protocol (ARP) table information. Format Mode show arp brief Privileged EXEC Term Definition Age Time (seconds) The time it takes for an ARP entry to age out. This value is configurable. Age time is measured in seconds. Response Time (seconds) The time it takes for an ARP request timeout. This value is configurable. Response time is measured in seconds. Retries The maximum number of times an ARP request is retried. This value is configurable. Cache Size The maximum number of entries in the ARP table. This value is configurable. Dynamic Renew Mode Displays whether the ARP component automatically attempts to renew dynamic ARP entries when they age out. Total Entry The total entries in the ARP table and the peak entry count in the ARP table. Count Current / Peak Static Entry The static entry count in the ARP table and maximum static entry count in the ARP table. Count Current / Max Routing Commands 236