Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 256

ProSafe Managed Switch Format Mode ip vrrp ip [secondary] Interface Config no ip vrrp ip Use this command in Interface Config mode to delete a secondary IP address value from the interface. To delete the primary IP address, you must delete the virtual router on the interface. Format Mode no ip vrrp secondary Interface Config ip vrrp authentication This command sets the authorization details value for the virtual router configured on a specified interface. The parameter {none | simple} specifies the authorization type for virtual router configured on the specified interface. The parameter [key] is optional, it is only required when authorization type is simple text password. The parameter is the virtual router ID which has an integer value ranges from 1 to 255. Default Format Mode no authorization ip vrrp authentication {none | simple } Interface Config no ip vrrp authentication This command sets the default authorization details value for the virtual router configured on a specified interface. Format Mode no ip vrrp authentication Interface Config ip vrrp preempt This command sets the preemption mode value for the virtual router configured on a specified interface. The parameter is the virtual router ID, which is an integer from 1 to 255. Default Format Mode enabled ip vrrp preempt Interface Config Routing Commands 256