Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 95

ProSafe Managed Switch no dot1x port-control all This command sets the authentication mode on all ports to the default value. Format Mode no dot1x port-control all Global Config dot1x re-authenticate This command begins the re-authentication sequence on the specified port. This command is only valid if the control mode for the specified port is "auto" or "mac-based". If the control mode is not "auto" or "mac-based", an error will be returned. Format Mode dot1x re-authenticate Privileged EXEC dot1x re-authentication This command enables re-authentication of the supplicant for the specified port. Default Format Mode disabled dot1x re-authentication Interface Config no dot1x re-authentication This command disables re-authentication of the supplicant for the specified port. Format Mode no dot1x re-authentication Interface Config dot1x system-auth-control Use this command to enable the dot1x authentication support on the switch. While disabled, the dot1x configuration is retained and can be changed, but is not activated. Default Format Mode disabled dot1x system-auth-control Global Config Switching Commands 95