Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 517

ProSafe Managed Switch Format Mode logging cli-command Global Config no logging cli-command This command disables the CLI command Logging feature. Format Mode no logging cli-command Global Config logging console This command enables logging to the console. You can specify the value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode disabled; critical when enabled logging console [severitylevel] Global Config no logging console This command disables logging to the console. Format Mode no logging console Global Config logging host This command enables logging to a host. You can configure up to eight hosts. The is the IP address of the logging host. The indicates the type of address ipv4 or ipv6 or dns being passed. The value is a port number from 1 to 65535. You can specify the value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode • port-514 • level-critical (2) logging host [][] Global Config Utility Commands 517