Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 574

ProSafe Managed Switch LS_ACK packet field definitions. Field Length Definition Length of packet no debug ospf packet This command disables tracing of OSPF packets. Format Mode no debug ospf packet Privileged EXEC debug ipv6 ospfv3 packet Use this command to enable OSPFv3 packet debug trace. Default Format Mode disabled debug ipv6 ospfv3 packet Privileged EXEC no debug ipv6 ospfv3 packet Use this command to disable tracing of OSPFv3 packets. Format Mode no debug ipv6 ospfv3 packet Privileged EXEC debug ping packet This command enables tracing of ICMP echo requests and responses. The command traces pings on the network port/ serviceport for switching packages. For routing packages, pings are traced on the routing ports as well. Default Format Mode disabled debug ping packet Privileged EXEC A sample output of the trace message is shown below. JAN 01 00:21:22 192.168.17.29-1 SIM[181040176]: sim_debug.c(128) 20 % Pkt TX - Intf: 1/0/1(1), SRC_IP:10.50.50.2, DEST_IP:10.50.50.1, Type:ECHO_REQUEST JAN 01 00:21:22 192.168.17.29-1 SIM[182813968]: sim_debug.c(82) 21 % Pkt RX - Intf: 1/0/1(1), S Utility Commands 574