Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 94

ProSafe Managed Switch no dot1x max-users This command resets the maximum number of clients allowed per port to its default value. Format Mode no dot1x max-req Interface Config dot1x port-control This command sets the authentication mode to use on the specified port. Select force-unauthorized to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized. Select force-authorized to specify that the authenticator PAE unconditionally sets the controlled port to authorized. Select auto to specify that the authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator and the authentication server. If the mac-based option is specified, then MAC-based dot1x authentication is enabled on the port. Default Format Mode auto dot1x port-control {force-unauthorized | force-authorized | auto | mac-based} Interface Config no dot1x port-control This command sets the 802.1x port control mode on the specified port to the default value. Format Mode no dot1x port-control Interface Config dot1x port-control all This command sets the authentication mode to use on all ports. Select force-unauthorized to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized. Select force-authorized to specify that the authenticator PAE unconditionally sets the controlled port to authorized. Select auto to specify that the authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator and the authentication server. If the mac-based option is specified, then MAC-based dot1x authentication is enabled on the port. Default Format Mode auto dot1x port-control all {force-unauthorized | force-authorized | auto | mac-based} Global Config Switching Commands 94