Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 302

ProSafe Managed Switch Term Definition Area ID The area ID of the OSPF area associated with the interface. Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received Hello Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities. Router Priority The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated router on this network. Dead Timer Due The amount of time, in seconds, to wait before the router assumes the neighbor is unreachable. Up Time Neighbor uptime; how long since the adjacency last reached the Full state. State The state of the neighboring routers. Events The number of times this neighbor relationship has changed state, or an error has occurred. Retransmission Queue Length An integer representing the current length of the retransmission queue of the specified neighbor router Id of the specified interface. The following shows example CLI display output for the command. (Switch) #show ip ospf neighbor 170.1.1.50 Interface 0/17 Neighbor IP Address 170.1.1.50 Interface Index 17 Area Id 0.0.0.2 Options 0x2 Router Priority 1 Dead timer due in (secs 15 Up Time 0 days 2 hrs 8 mins 46 secs State Full/BACKUP-DR Events 4 Retransmission Queue Length 0 show ip ospf range This command displays information about the area ranges for the specified . The identifies the OSPF area whose ranges are being displayed. Format Modes show ip ospf range • Privileged EXEC • User EXEC Routing Commands 302