Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 529

ProSafe Managed Switch clear config This command resets the configuration to the factory defaults without powering off the switch. When you issue this command, a prompt appears to confirm that the reset should proceed. When you enter y, you automatically reset the current configuration on the switch to the default values. It does not reset the switch. Format Mode clear config Privileged EXEC clear mac-addr-table This command clears the dynamically learned MAC addresses of the switch. Format Mode clear mac-addr-table Privileged EXEC clear logging buffered This command clears the messages maintained in the system log. Format Mode clear logging buffered Privileged EXEC clear counters This command clears the statistics for a specified , for all the ports, or for the entire switch based upon the argument. Format Mode clear counters { | all} Privileged EXEC clear igmpsnooping This command clears the tables managed by the IGMP Snooping function and attempts to delete these entries from the Multicast Forwarding Database. Format Mode clear igmpsnooping Privileged EXEC Utility Commands 529