Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 263

ProSafe Managed Switch Term Mode State Definition Indicates whether the virtual router is enabled or disabled. The state (Master/backup) of the virtual router. DHCP and BOOTP Relay Commands This section describes the commands you use to configure BootP/DHCP Relay on the switch. A DHCP relay agent operates at Layer 3 and forwards DHCP requests and replies between clients and servers when they are not on the same physical subnet. bootpdhcprelay cidoptmode This command enables the circuit ID option mode for BootP/DHCP Relay on the system. Default Format Mode disabled bootpdhcprelay cidoptmode Global Config no bootpdhcprelay cidoptmode This command disables the circuit ID option mode for BootP/DHCP Relay on the system. Format Mode no bootpdhcprelay cidoptmode Global Config bootpdhcprelay maxhopcount This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the system. The parameter has a range of 1 to 16. Default Format Mode 4 bootpdhcprelay maxhopcount Global Config no bootpdhcprelay maxhopcount This command configures the default maximum allowable relay agent hops for BootP/DHCP Relay on the system. Format Mode no bootpdhcprelay maxhopcount Global Config Routing Commands 263