Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 147

ProSafe Managed Switch no ip dhcp snooping database write-delay Use this command to set the write delay value to the default value. Format Mode no ip dhcp snooping database write-delay Global Config ip dhcp snooping binding Use this command to configure static DHCP Snooping binding. Format Mode ip dhcp snooping binding vlan interface Global Config no ip dhcp snooping binding Use this command to remove the DHCP static entry from the DHCP Snooping database. Format Mode no ip dhcp snooping binding Global Config ip verify binding Use this command to configure static IP source guard (IPSG) entries. Format Mode ip verify binding vlan interface Global Config no ip verify binding Use this command to remove the IPSG static entry from the IPSG database. Format Mode no ip verify binding vlan interface Global Config ip dhcp snooping limit Use this command to control the rate at which the DHCP Snooping messages come. The default rate is 15 pps with a range from 0 to 30 pps. The default burst level is 1 second with a range of 1 to 15 seconds. Default 15 pps for rate limiting and 1 sec for burst interval Switching Commands 147