Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 594

ProSafe Managed Switch IPv6 Default Router is FE80::204:76FF:FE73:423A Burned In MAC Address 00:10:18:82:03:37 Locally Administered MAC Address 00:00:00:00:00:00 MAC Address Type Burned In Network Configuration Protocol Current......... None Management VLAN ID 1 Web Mode Enable Java Mode Enable Console Port Access Commands This section describes the commands you use to configure the console port. You can use a serial cable to connect a management host directly to the console port of the switch. configuration Use this command to access Global Config mode. From Global Config mode, you can configure a variety of system settings, including user accounts. You can also enter other command modes, including Line Config mode. Format Mode configuration Privileged EXEC line Use this command to access Line Config mode, which allows you to configure various Telnet settings, ssh settings, and the console port. Format Mode line {console | telnet | ssh} Global Config serial baudrate Use this command to specify the communication rate of the terminal interface. The supported rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. Default Format Mode 9600 serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200} Line Config Management Commands 594