Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 317

ProSafe Managed Switch ip icmp echo-reply Use this command to enable the generation of ICMP Echo Reply messages by the router. By default, the generation of ICMP Echo Reply messages is enabled. Default Format Mode enabled ip icmp echo-reply Global Config no ip icmp echo-reply Use this command to prevent the generation of ICMP Echo Reply messages by the router. Format Mode no ip icmp echo-reply Global Config ip icmp error-interval Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate limit is configured as a token bucket, with two configurable parameters, burst-size and burst-interval. The burst-interval specifies how often the token bucket is initialized with burst-size tokens. burst-interval is from 0 to 2147483647 milliseconds (msec). The burst-size is the number of ICMP error messages that can be sent during one burst-interval. The range is from 1 to 200 messages. To disable ICMP rate limiting, set burst-interval to zero (0). Default Format Mode • burst-interval of 1000 msec. • burst-size of 100 messages ip icmp error-interval [] Global Config no ip icmp error-interval Use the no form of the command to return burst-interval and burst-size to their default values. Format Mode no ip icmp error-interval Global Config Routing Commands 317