Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 614

ProSafe Managed Switch username unlock Use this command to unlock a user's account. Only a user with read/write access can re-activate a locked user account. Format Mode username unlock Global Config username snmpv3 accessmode Use this command to specify the snmpv3 access privileges for the specified login user. The valid accessmode values are readonly or readwrite. The is the login user name for which the specified access mode applies. The default is readwrite for the "admin" user and readonly for all other users. You must enter the in the same case you used when you added the user. To see the case of the , enter the show users command. Defaults Format Mode • admin - readwrite • other - readonly username snmpv3 accessmode {readonly | readwrite} Global Config no username snmpv3 accessmode Use this command to set the snmpv3 access privileges for the specified user as readwrite for the "admin" user and readonly for all other users. The value is the user name for which the specified access mode will apply. Format Mode no username snmpv3 accessmode Global Config username snmpv3 authentication Use this command to specify the authentication protocol to be used for the specified user. The valid authentication protocols are none, md5 or sha. If you specify md5 or sha, the login password is also used as the snmpv3 authentication password and therefore must be at least eight characters in length. The is the user name associated with the authentication protocol. You must enter the in the same case you used when you added the user. To see the case of the , enter the show users command. Default Format Mode no authentication username snmpv3 authentication {none | md5 | sha} Global Config Management Commands 614