Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 97

ProSafe Managed Switch no dot1x timeout This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set. Format Mode no dot1x timeout {guest-vlan-period | reauth-period | quiet-period | tx-period | supp-timeout | server-timeout} Interface Config dot1x unauthenticated-vlan Use this command to configure the unauthenticated VLAN associated with that port. The unauthenticated VLAN ID can be a valid VLAN ID from 0-Maximum supported VLAN ID (4093 for 7000 series). The unauthenticated VLAN must be statically configured in the VLAN database to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not operational. Default Format Mode 0 dot1x unauthenticated-vlan Interface Config no dot1x unauthenticated-vlan This command resets the unauthenticated-vlan associated with the port to its default value. Format Mode no dot1x unauthenticated-vlan Interface Config dot1x user This command adds the specified user to the list of users with access to the specified port or all ports. The parameter must be a configured user. Format Mode dot1x user { | all} Global Config no dot1x user This command removes the user from the list of users with access to the specified port or all ports. Format Mode no dot1x user { | all} Global Config Switching Commands 97