Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 518

ProSafe Managed Switch logging host remove This command disables logging to host. See show logging hosts on page 519 for a list of host indexes. Format Mode logging host remove Global Config logging syslog This command enables syslog logging. The parameter is an integer with a range of 1-65535. Default Format Mode disabled logging syslog [port ] Global Config no logging syslog This command disables syslog logging. Format Mode no logging syslog Global Config show logging This command displays logging configuration information. Format Mode show logging Privileged EXEC Term Definition Logging Client Local Port Port on the collector/relay to which syslog messages are sent. CLI Command Logging Shows whether CLI Command logging is enabled. Console Logging Shows whether console logging is enabled. Console Logging Severity Filter The minimum severity to log to the console log. Messages with an equal or lower numerical severity are logged. Buffered Logging Shows whether buffered logging is enabled. Syslog Logging Shows whether syslog logging is enabled. Utility Commands 518