Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 329

ProSafe Managed Switch Term Definition Expiry Time (secs) The expiry time in seconds, which is the time left for this route to age out. Up Time (secs) The time when a specified route was learnt, in seconds. PIM Commands This section describes the commands you use to configure Protocol Independent Multicast (PIM). PIM is a multicast routing protocol that provides scalable inter-domain multicast routing across the Internet, independent of the mechanisms provided by any particular unicast routing protocol. ip pim dense (Global Config) This command enables the administrative mode of PIM-DM in the router. Default Format Mode Disabled ip pim dense Global Config no ip pim dense (Global Config) This command disables the administrative mode of PIM-DM in the router. Format Mode no ip pim dense Global Config ip pim (Interface Config) This command sets administrative mode of PIM on an interface to enabled. Default Format Mode disabled ip pim Interface Config no ip pim (Interface Config) This command sets administrative mode of PIM on an interface to disabled. Format Mode no ip pim Interface Config IP Multicast Commands 329