Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 106

ProSafe Managed Switch dot1x supplicant max-start Use this command to configure the number of attempts that the supplicant makes to find the authenticator before the supplicant assumes that there is no authenticator. Default Format Mode 3 dot1x supplicant max-start Interface Config no dot1x supplicant max-start Use this command to set the max-start value to the default. Format Mode no dot1x supplicant max-start Interface Config dot1x supplicant timeout start-period Use this command to configure the start period timer interval to wait for the EAP identity request from the authenticator. Default Format Mode 30 seconds dot1x supplicant timeout start-period Interface Config no dot1x supplicant timeout start-period Use this command to set the start-period value to the default. Format Mode no dot1x supplicant timeout start-period Interface Config dot1x supplicant timeout held-period Use this command to configure the held period timer interval to wait for the next authentication on previous authentication fail. Default Format Mode 30 seconds dot1x supplicant timeout held-period Interface Config Switching Commands 106