Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 487

ProSafe Managed Switch configuration that referenced the time range starts going into effect. The second occurrence is the ending hours:minutes at which the configuration that referenced the time range is no longer in effect. The hours:minutes are expressed in a 24-hour clock. For example, 8:00 is 8:00 am and 20:00 is 8:00 pm The frequency is how often this periodic entry will become active. If the value is set to 0 , timer schedule will be threated as absolute.. Format Mode periodic {days-of-the-week time} to {[days-of-the-week] time} Time-Range Config no periodic Use this command to delete a periodic time entry from a time range. Format Mode no periodic {days-of-the-week time} to {[days-of-the-week] time} Time-Range Config periodic {start|end} time Use this command to configure the start/end time for the time-range. Format Mode periodic {start|end} time Time-Range Config show time-range Use this command to display a time range and all the absolute/periodic time entries that are defined for the time range. Use the name parameter to identify a specific time range to display. When name is not specified, all the time ranges defined in the system are displayed. Format Mode show time-range Privileged EXEC Term Number of Time Ranges Time Range Name Time Range Status Absolute start Absolute end Periodic Entries Definition Number of time ranges configured in the system. Name of the time range. Status of the time range (active/inactive). Start time and day for absolute time entry. End time and day for absolute time entry. Number of periodic entries in a time-range. Quality of Service (QoS) Commands 487