Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 516

ProSafe Managed Switch Logging Commands This section describes the commands you use to configure system logging, and to view logs and the logging settings. logging buffered This command enables logging to an in-memory log that keeps up to 128 logs. Default Format Mode disabled; critical when enabled logging buffered Global Config no logging buffered This command disables logging to in-memory log. Format Mode no logging buffered Global Config logging buffered wrap This command enables wrapping of in-memory logging when the log file reaches full capacity. Otherwise when the log file reaches full capacity, logging stops. Default Format Mode enabled logging buffered wrap Privileged EXEC no logging buffered wrap This command disables wrapping of in-memory logging and configures logging to stop when the log file capacity is full. Format Mode no logging buffered wrap Privileged EXEC logging cli-command This command enables the CLI command logging feature, which enables the 7000 series software to log all CLI commands issued on the system. Default enabled Utility Commands 516