Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 92

ProSafe Managed Switch clear dot1x statistics This command resets the 802.1x statistics for the specified port or for all ports. Format Mode clear dot1x statistics { | all} Privileged EXEC clear radius statistics This command is used to clear all RADIUS statistics. Format Mode clear radius statistics Privileged EXEC dot1x guest-vlan This command configures VLAN as guest vlan on a per port basis. The command specifies an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximum VLAN ID supported by the platform. Default Format Mode disabled dot1x guest-vlan Interface Config no dot1x guest-vlan This command disables Guest VLAN on the interface. Default Format Mode disabled no dot1x guest-vlan Interface Config dot1x initialize This command begins the initialization sequence on the specified port. This command is only valid if the control mode for the specified port is "auto" or "mac-based". If the control mode is not 'auto' or "mac-based", an error will be returned. Format Mode dot1x initialize Privileged EXEC dot1x mac-auth-bypass This command enables MAC-Based Authentication Bypass (MAB) for 802.1x-unaware clients. MAB provides 802.1x-unaware clients controlled access to the network using the Switching Commands 92