Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 546

ProSafe Managed Switch no hardware-address This command removes the hardware address of the DHCP client. Format Mode no hardware-address DHCP Pool Config host This command specifies the IP address and network mask for a manual binding to a DHCP client. Address and Mask are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. The prefix-length is an integer from 0 to 32. Default Format Mode none host [{ | }] DHCP Pool Config no host This command removes the IP address of the DHCP client. Format Mode no host DHCP Pool Config lease This command configures the duration of the lease for an IP address that is assigned from a DHCP server to a DHCP client. The overall lease time should be between 1-86400 minutes. If you specify infinite, the lease is set for 60 days. You can also specify a lease duration. Days is an integer from 0 to 59. Hours is an integer from 0 to 23. Minutes is an integer from 0 to 59. Default Format Mode 1 (day) lease [{ [] [] | infinite}] DHCP Pool Config no lease This command restores the default value of the lease time for DHCP Server. Format Mode no lease DHCP Pool Config Utility Commands 546