Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 303

ProSafe Managed Switch Term Area ID IP Address Subnet Mask Lsdb Type Advertisement Definition The area id of the requested OSPF area. An IP address which represents this area range. A valid subnet mask for this area range. The type of link advertisement associated with this area range. The status of the advertisement. Advertisement has two possible settings: enabled or disabled. show ip ospf statistics This command displays information about recent Shortest Path First (SPF) calculations. The SPF is the OSPF routing table calculation. The output lists the number of times the SPF has run for each OSPF area. A table follows this information. For each of the 15 most recent SPF runs, the table lists how long ago the SPF ran, how long the SPF took, and the reasons why the SPF was scheduled. Format Modes show ip ospf statistics • Privileged EXEC • User EXEC Term Delta T SPF Duration Reason Definition How long ago the SPF ran. The time is in the format hh:mm:ss, giving the hours, minutes, and seconds since the SPF run. How long the SPF took in milliseconds. The reason the SPF was scheduled. Reason codes are as follows: • R - a router LSA has changed • N - a network LSA has changed • SN - a type 3 network summary LSA has changed • SA - a type 4 ASBR summary LSA has changed • X - a type 5 or type 7 external LSA has changed show ip ospf stub table This command displays the OSPF stub table. The information below will only be displayed if OSPF is initialized on the switch. Format Modes show ip ospf stub table • Privileged EXEC • User EXEC Routing Commands 303