Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 132

ProSafe Managed Switch show lacp partner Use this command to display LACP partner attributes. Format Mode show lacp partner {|all} Privileged EXEC The following output parameters are displayed. Parameter Description System Priority The administrative value of priority associated with the Partner's System ID. System ID The value representing the administrative value of the Aggregation Port's protocol Partner's System ID. Admin Key The administrative value of the Key for the protocol Partner. Port Priority The administrative value of the port priority for the protocol Partner. Port-ID The administrative value of the port number for the protocol Partner. Admin State The administrative values of the actor state for the protocol Partner. show port-channel brief This command displays the static capability of all port-channel (LAG) interfaces on the device as well as a summary of individual port-channel interfaces. Format Mode show port-channel brief • Privileged EXEC • User EXEC For each port-channel the following information is displayed: Term Logical Interface Port-channel Name Link-State Trap Flag Type Mbr Ports Active Ports Definition The unit/slot/port of the logical interface. The name of port-channel (LAG) interface. Shows whether the link is up or down. Shows whether trap flags are enabled or disabled. Shows whether the port-channel is statically or dynamically maintained. The members of this port-channel. The ports that are actively participating in the port-channel. Switching Commands 132