Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 28

ProSafe Managed Switch Term Definition Model Identifier The model identifier for this switch. Model Identifier is a 32-character field assigned by the device manufacturer to identify the device. Switch Status The switch status. Possible values are OK, Unsupported, Code Mismatch, Config Mismatch, or Not Present. Switch Description The switch description. Expected Code Version The expected code version. Detected Code Version The version of code running on this switch. If the switch is not present and the data is from pre-configuration, then the code version is "None". Detected Code in Flash The version of code that is currently stored in FLASH memory on the switch. This code executes after the switch is reset. If the switch is not present and the data is from pre-configuration, then the code version is "None". Up Time The system up time. show supported switchtype This commands displays information about all supported switch types or a specific switch type. Format Mode show supported switchtype [] User EXEC Privileged EXEC If you do not supply a value for , the following output appears: Term Definition Switch Index (SID) The index into the database of supported switch types. This index is used when preconfiguring a member to be added to the stack. Model Identifier The model identifier for the supported switch type. Management Preference The management preference value of the switch type. Code Version The code load target identifier of the switch type. If you supply a value for , the following output appears: Term Switch Type Model Identifier Switch Description Definition The 32-bit numeric switch type for the supported switch. The model identifier for the supported switch type. The description for the supported switch type. Stacking Commands 28