Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 153

ProSafe Managed Switch show ip verify source Use this command to display the IPSG configurations on all ports. Format Mode show ip verify source • Privileged EXEC • User EXEC Term Interface Filter Type IP Address MAC Address VLAN Definition Interface address in unit/slot/port format. Is one of two values: • ip-mac: User has configured MAC address filtering on this interface. • ip: Only IP address filtering on this interface. IP address of the interface If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all." The VLAN for the binding rule. Example: The following shows example CLI display output for the command. (switch) #show ip verify source Interface --------- 0/1 0/1 Filter Type ----------- ip-mac ip-mac IP Address 210.1.1.3 210.1.1.4 MAC Address 00:02:B3:06:60:80 00:0F:FE:00:13:04 Vlan ----- 10 10 show ip source binding This command displays the IPSG bindings. Format Mode show ip source binding [{static/dynamic}] [interface unit/slot/port] [vlan id] • Privileged EXEC • User EXEC Term MAC Address IP Address Type Definition The MAC address for the entry that is added. The IP address of the entry that is added. Entry type; statically configured from CLI or dynamically learned from DHCP Snooping. Switching Commands 153