Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 425

ProSafe Managed Switch ipv6 pim join-prune-interval Use this command to configure the interface join/prune interval for the PIM-SM router. The join/prune interval is specified in seconds. This parameter can be configured to a value from 0 to 18000. Default Format Mode 60 ipv6 pim join-prune-interval Interface Config no ipv6 pim join-prune-interval Use this command to set the join/prune interval to the default value. Format Mode no ipv6 pim join-prune-interval Interface Config ipv6 pim register-rate-limit Use this command to configure the Register Threshold rate for the Rendezvous Point router to switch to a source-specific shortest path. The valid values are from (0 to 2000 kilobits/sec). Default Format Mode 0 ipv6 pim register-rate-limit Global Config no ipv6 pim register-rate-limit Use this command to reset the register threshold rate for the Rendezvous Pointer router to the default value. Format Mode no ipv6 pim register-rate-limit Global Config ipv6 pim rp-address Use this command to statically configure the RP address for one or more multicast groups. The parameter is the IP address of the RP. The parameter is the group address supported by the RP. The parameter is the group mask for the group address. The optional keyword override indicates that if IPv6 Multicast Commands 425