Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 324

ProSafe Managed Switch If you use the summary parameter, the command displays the following column headings in the output table: Term Source IP Group IP Protocol Incoming Interface Outgoing Interface List Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The multicast routing protocol by which this entry was created. The interface on which the packet for this source arrives. The list of outgoing interfaces on which this packet is forwarded. DVMRP Commands This section provides a detailed explanation of the Distance Vector Multicast Routing Protocol (DVMRP) commands. ip dvmrp(Global Config) This command sets administrative mode of DVMRP in the router to active. Default Format Mode disabled ip dvmrp Global Config no ip dvmrp(Global Config) This command sets administrative mode of DVMRP in the router to inactive. Format Mode no ip dvmrp Global Config ip dvmrp metric This command configures the metric for an interface. This value is used in the DVMRP messages as the cost to reach this network. This field has a range of 1 to 31. Default Format Mode 1 ip dvmrp metric Interface Config IP Multicast Commands 324