Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 550

ProSafe Managed Switch no option This command removes the DHCP Server options. The parameter specifies the DHCP option code. Format Mode no option DHCP Pool Config ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none ip dhcp excluded-address [highaddress] Global Config no ip dhcp excluded-address This command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Format Mode no ip dhcp excluded-address [highaddress] Global Config ip dhcp ping packets Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to a pool address as part of a ping operation. By default the number of packets sent to a pool address is 2, which is the smallest allowed number when sending packets. Setting the number of packets to 0 disables this command. Default Format Mode 2 ip dhcp ping packets Global Config no ip dhcp ping packets This command prevents the server from pinging pool addresses and sets the number of packets to 0. Default 0 Utility Commands 550