Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 40

ProSafe Managed Switch no auto-negotiate all This command disables automatic negotiation on all ports. Format Mode no auto-negotiate all Global Config description Use this command to create an alpha-numeric description of the port. Format Mode description Interface Config mtu Use the mtu command to set the maximum transmission unit (MTU) size, in bytes, for frames that ingress or egress the interface. You can use the mtu command to configure jumbo frame support for physical and port-channel (LAG) interfaces. For the standard 7000 series implementation, the MTU size is a valid integer between 1522 - 9216 for tagged packets and a valid integer between 1518 - 9216 for untagged packets. Note: To receive and process packets, the Ethernet MTU must include any extra bytes that Layer-2 headers might require. To configure the IP MTU size, which is the maximum size of the IP packet (IP Header + IP payload), see ip mtu on page 242. Default Format Mode 1518 (untagged) mtu Interface Config no mtu This command sets the default MTU size (in bytes) for the interface. Format Mode no mtu Interface Config shutdown This command disables a port. Switching Commands 40