Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 21

2. Stacking Commands 2 This chapter contains the following sections: • Dedicated Port Stacking • Front Panel Stacking Commands • Non-Stop Forwarding Commands • Stack Firmware Synchronization Commands The commands in this chapter are in two functional groups: • Show commands display switch settings, statistics, and other information. • Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting. The Primary Management Unit is the unit that controls the stack. Dedicated Port Stacking This section describes the commands you use to configure dedicated port stacking. stack This command sets the mode to Stack Global Config. Format Mode stack Global Config member This command configures a switch. The is the switch identifier of the switch to be added/removed from the stack. The is the index into the database of the supported switch types, indicating the type of the switch being preconfigured. The switch index is a 32-bit integer. This command is executed on the Primary Management Unit. Format Mode member Stack Global Config 21