Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 530

ProSafe Managed Switch clear pass This command resets all user passwords to the factory defaults without powering off the switch. You are prompted to confirm that the password reset should proceed. Format Mode clear pass Privileged EXEC clear port-channel This command clears all port-channels (LAGs). Format Mode clear port-channel Privileged EXEC clear traplog This command clears the trap log. Format Mode clear traplog Privileged EXEC clear vlan This command resets VLAN configuration parameters to the factory defaults. Format Mode clear vlan Privileged EXEC enable password This command prompts you to change the Privileged EXEC password. Passwords are a maximum of 64 alphanumeric characters. The password is case sensitive. The option [encrypted] allows the administrator to transfer the enable password between devices without having to know the password. In this case, the parameter must be exactly 128 hexadecimal characters. Format Mode enable password [encrypted] Privileged EXEC logout This command closes the current telnet connection or resets the current serial connection. Utility Commands 530