Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 626

ProSafe Managed Switch Note: If the default list is not set, only the enable password is checked. This has the same effect as the following command: aaa authentication enable default enable On the console, the enable password is used if it exists. If no password is set, the process will succeed anyway. This has the same effect as the following command: aaa authentication enable default enable none no aaa authentication enable Use this command to remove the authentication method. Format Mode no aaa authentication enable {default | list-name} method1 [method2...] Global Config aaa authentication dot1x Use this command to set authentication for dot1x users. The method argument identifies the list of methods that the authentication algorithm tries, in the given sequence. The additional methods of authentication are used only if the previous method returns an error, not if there is an authentication failure. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. For example if none is specified as an authentication method after radius, no authentication is used if the radius server is down. Format Mode aaa authentication dot1x default method1 [method2...] Global Config method1 [method2...] At least one from the following table: Keyword local none radius ias Description Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the internal authentication server users database for authentication. Management Commands 626