Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 458

ProSafe Managed Switch conditions of more than one class, preference is based on the order in which you add the classes to the policy. The first class you add has the highest precedence. This set of commands consists of policy creation/deletion, class addition/removal, and individual policy attributes. Note: The only way to remove an individual policy attribute from a class instance within a policy is to remove the class instance and re-add it to the policy. The values associated with an existing policy attribute can be changed without removing the class instance. The CLI command root is policy-map. assign-queue This command modifies the queue id to which the associated traffic stream is assigned. The queueid is an integer from 0 to n-1, where n is the number of egress queues supported by the device. Format Mode Incompatibilities assign-queue Policy-Class-Map Config Drop drop This command specifies that all packets for the associated traffic stream are to be dropped at ingress. Format Mode Incompatibilities drop Policy-Class-Map Config Assign Queue, Mark (all forms), Mirror, Police, Redirect mirror This command specifies that all incoming packets for the associated traffic stream are copied to a specific egress interface (physical port or LAG). Format Mode Incompatibilities mirror Policy-Class-Map Config Drop, Redirect Quality of Service (QoS) Commands 458