Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 131

ProSafe Managed Switch port-channel name This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port for a configured port-channel, and is an alphanumeric string up to 15 characters. Format Mode port-channel name { | all | } Global Config port-channel system priority Use this command to configure port-channel system priority. The valid range of is 0-65535. Default Format Mode 0x8000 port-channel system priority Global Config no port-channel system priority Use this command to configure the default port-channel system priority value. Format Mode no port-channel system priority Global Config show lacp actor Use this command to display LACP actor attributes. Format Mode show lacp actor {|all} Global Config The following output parameters are displayed. Parameter Description System Priority The system priority assigned to the Aggregation Port. Admin Key The administrative value of the Key. Port Priority The priority value assigned to the Aggregation Port. Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs. Switching Commands 131