Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 583

ProSafe Managed Switch show sflow receivers Use this command to display configuration information related to the sFlow receivers. Format Mode show sflow receivers [] Privileged EXEC Field Receiver Index Owner String Time Out Max Datagram Size Port IP Address Address Type Datagram Version Description The sFlow Receiver associated with the sampler/poller. The identity string for receiver, the entity making use of this sFlowRcvrTable entry. The time (in seconds) remaining before the receiver is released and stops sending samples to sFlow receiver. The maximum number of bytes that can be sent in a single sFlow datagram. The destination Layer4 UDP port for sFlow datagrams. The sFlow receiver IP address. The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6 address, the value is 2. The sFlow protocol version to be used while sending samples to sFlow receiver. Example: The following shows example CLI display output for the command. (switch) #show sflow receivers 1 Receiver Index 1 Owner String Time out 0 IP Address 0.0.0.0 Address Type 1 Port 6343 Datagram Version 5 Maximum Datagram Size 1400 show sflow samplers Use this command to display the sFlow sampling instances created on the switch. Format Mode show sflow samplers Privileged EXEC Utility Commands 583