Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 271

ProSafe Managed Switch no area nssa This command disables nssa from the specified area id. Format Mode no area nssa Router OSPF Config area nssa default-info-originate (OSPF) This command configures the metric value and type for the default route advertised into the NSSA. The optional metric parameter specifies the metric of the default route and is to be in a range of 1-16777214. If no metric is specified, the default value is 10. The metric type can be comparable (nssa-external 1) or non-comparable (nssa-external 2). Format Mode area nssa default-info-originate [] [{comparable | non-comparable}] Router OSPF Config no area nssa default-info-originate (OSPF) This command disables the default route advertised into the NSSA. Format Mode no area nssa default-info-originate [] [{comparable | non-comparable}] Router OSPF Config area nssa no-redistribute (OSPF) This command configures the NSSA Area Border router (ABR) so that learned external routes will not be redistributed to the NSSA. Format Mode area nssa no-redistribute Router OSPF Config no area nssa no-redistribute (OSPF) This command disables the NSSA ABR so that learned external routes are redistributed to the NSSA. Format Mode no area nssa no-redistribute Router OSPF Config Routing Commands 271