Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 468

ProSafe Managed Switch show diffserv service This command displays policy service information for the specified interface and direction. The parameter specifies a valid unit/slot/port number for the system. Format Mode show diffserv service [in | out] Privileged EXEC Term Definition DiffServ Admin Mode The current setting of the DiffServ administrative mode. An attached policy is only in effect on an interface while DiffServ is in an enabled mode. Interface Valid slot and port number separated by forward slashes. Direction The traffic direction of this interface service. Operational Status The current operational status of this DiffServ service interface. Policy Name The name of the policy attached to the interface in the indicated direction. Policy Details Attached policy details, whose content is identical to that described for the show policy-map command (content not repeated here for brevity). show diffserv service brief This command displays all interfaces in the system to which a DiffServ policy has been attached. The inbound direction parameter is optional. Format Mode show diffserv service brief [in | out] Privileged EXEC Term Definition DiffServ Admin Mode The current setting of the DiffServ administrative mode. An attached policy is only active on an interface while DiffServ is in an enabled mode. The following information is repeated for interface and direction (only those interfaces configured with an attached policy are shown): Term Interface Direction OperStatus Policy Name Definition Valid slot and port number separated by forward slashes. The traffic direction of this interface service. The current operational status of this DiffServ service interface. The name of the policy attached to the interface in the indicated direction. Quality of Service (QoS) Commands 468