Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 255

ProSafe Managed Switch ip vrrp (Interface Config) Use this command in Interface Config mode to create a virtual router associated with the interface. The parameter is the virtual router ID, which has an integer value range from 1 to 255. Format Mode ip vrrp Interface Config no ip vrrp Use this command in Interface Config mode to delete the virtual router associated with the interface. The virtual Router ID, , is an integer value that ranges from 1 to 255. Format Mode no ip vrrp Interface Config ip vrrp mode This command enables the virtual router configured on the specified interface. Enabling the status field starts a virtual router. The parameter is the virtual router ID which has an integer value ranging from 1 to 255. Default Format Mode disabled ip vrrp mode Interface Config no ip vrrp mode This command disables the virtual router configured on the specified interface. Disabling the status field stops a virtual router. Format Mode no ip vrrp mode Interface Config ip vrrp ip This command sets the virtual router IP address value for an interface. The value for is the IP address which is to be configured on that interface for VRRP. The parameter is the virtual router ID which has an integer value range from 1 to 255. You can use the optional [secondary] parameter to designate the IP address as a secondary IP address. Default none Routing Commands 255