Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 87

ProSafe Managed Switch range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds. You can use this command on all ports (Global Config mode) or a single port (Interface Config mode), and it only has an effect only when GVRP is enabled. Default Format Mode 1000 set garp timer leaveall • Interface Config • Global Config no set garp timer leaveall This command sets how frequently Leave All PDUs are generated the default and only has an effect when GVRP is enabled. Format Mode no set garp timer leaveall • Interface Config • Global Config show garp This command displays GARP information. Format Mode show garp • Privileged EXEC • User EXEC Term Definition GMRP Admin Mode The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system. GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system. GVRP Commands This section describes the commands you use to configure and view GARP VLAN Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN configuration information, which allows GVRP to provide dynamic VLAN creation on trunk ports and automatic VLAN pruning. Note: If GVRP is disabled, the system does not forward GVRP messages. Switching Commands 87