Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 714

ProSafe Managed Switch If the user ID is specified, the following terms are displayed. Term Definition Password Configured If the password is configured. Max Bandwidth Up (bytes/sec) Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send data into the network. If the value is 0 then use the value configured for the captive portal. Max Bandwidth Down (bytes/sec) Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive data from the network. If the value is 0 or then use the value configured for the captive portal. Max Input Octets (bytes) Maximum number of octets the user is allowed to transmit.After this limit has been reached the user will be disconnected. If the value is 0 then use the value configured for the captive portal. Max Output Octets (bytes) Maximum number of octets the user is allowed to receive. After this limit has been reached the user will be disconnected. If the attribute is 0 then use the value configured for the captive portal. Max Total Octets (bytes) Maximum number of octets the user is allowed to transfer (sum of octets transmitted and received). After this limit has been reached the user will be disconnected. If the value is 0 then use the value configured for the captive portal. Example (switch)#show captive-portal user Session User ID User Name Timeout 1 user123 10 2 user234 0 Idle Timeout -------13 0 Group ID -------- 1 1 Group Name ----------- Default Default (switch)#show captive-portal user 1 User ID 1 User Name user123 Password Configured Yes Session Timeout 0 Idle Timeout 0 Max Bandwidth Up (bytes/sec 0 Max Bandwidth Down (bytes/sec 0 Max Input Octets (bytes 0 Max Output Octets (bytes 0 Max Total Octets (bytes 0 Group ID Group Name 1 Default 2 group2 Captive Portal Commands 714