Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 480

ProSafe Managed Switch show ip access-lists This command displays an IP ACL is the number used to identify the IP ACL. Format Mode show ip access-lists Privileged EXEC Note: Only the access list fields that you configure are displayed. Term Definition Rule Number The number identifier for each rule that is defined for the IP ACL. Action The action associated with each rule. The possible values are Permit or Deny. Match All Indicates whether this access list applies to every packet. Possible values are True or False. Protocol The protocol to filter for this rule. Source IP Address The source IP address for this rule. Source IP Mask The source IP Mask for this rule. Source L4 Port Keyword The source port for this rule. Destination IP The destination IP address for this rule. Address Destination IP The destination IP Mask for this rule. Mask Destination L4 Port Keyword The destination port for this rule. IP DSCP The value specified for IP DSCP. IP Precedence The value specified IP Precedence. IP TOS The value specified for IP TOS. Log Displays when you enable logging for the rule. Assign Queue The queue identifier to which packets matching this rule are assigned. Mirror Interface The unit/slot/port to which packets matching this rule are copied. Redirect Interface The unit/slot/port to which packets matching this rule are forwarded. Quality of Service (QoS) Commands 480