Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 539

ProSafe Managed Switch sntp server This command configures an SNTP server (a maximum of three). The optional priority can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535. Format Mode sntp server [ [ []]] Global Config no sntp server This command deletes an server from the configured SNTP servers. Format Mode no sntp server remove Global Config clock timezone When using SNTP/NTP time servers to update the switch's clock, the time data received from the server is based on Coordinated Universal Time (UTC) which is the same as Greenwich Mean Time (GMT). This may not be the time zone in which the switch is located. Use the clock timezone command to configure a time zone specifying the number of hours and optionally the number of minutes difference from UTC. To set the switch clock to UTC, use the no form of the command. Format Mode Default clock timezone zone-name +/-hours-offset [+/-minutes-offset] Global Config no clock timezone Zone name: A name to associate with the time zone Hours-offset: Number of hours difference with UTC Minutes-offset: Number of minutes difference with UTC no clock timezone This command sets the switch to UTC time. Format Mode no clock timezone Global Config clock summer-time recurring Use the clock summer-time recurring command to set the summertime offset to UTC recursively every year. If the optional parameters are not specified, they are read as either '0' or '\0', as appropriate. Utility Commands 539