Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 294

ProSafe Managed Switch Term Definition Spf Runs The number of times that the intra-area route table has been calculated using this area's link-state database. Area Border Router Count The total number of area border routers reachable within this area. Area LSA Count Total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. Area LSA Checksum A number representing the Area LSA Checksum for the specified AreaID excluding the external (LS type 5) link-state advertisements. Import Shows whether to import summary LSAs. Summary LSAs OSPF Stub Metric Value The metric value of the stub area. This field displays only if the area is a configured as a stub area. The following OSPF NSSA specific information displays only if the area is configured as an NSSA: Term Definition Import Shows whether to import summary LSAs into the NSSA. Summary LSAs Redistribute into NSSA Shows whether to redistribute information into the NSSA. Default Information Originate Shows whether to advertise a default route into the NSSA. Default Metric The metric value for the default route advertised into the NSSA. Default Metric The metric type for the default route advertised into the NSSA. Type Translator Role The NSSA translator role of the ABR, which is always or candidate. Translator The amount of time that an elected translator continues to perform its duties after it Stability Interval determines that its translator status has been deposed by another router. Translator State Shows whether the ABR translator state is disabled, always, or elected. show ip ospf asbr This command displays the internal OSPF routing table entries to Autonomous System Boundary Routers (ASBR). This command takes no options. Format Mode show ip ospf asbr • Privileged EXEC • User EXEC Routing Commands 294