Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 462

ProSafe Managed Switch For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7. Format police-simple { conform-action {drop | set-prec-transmit | set-dscp-transmit | set-cos-transmit | transmit} [violate-action {drop | set-prec-transmit | set-dscp-transmit | set-cos-transmit | transmit}]} Mode Policy-Class-Map Config Incompatibilities Drop, Mark (all forms) police-two-rate This command is the two-rate form of the police command and is used to establish the traffic policing style for the specified class. For each outcome, the only possible actions are drop, set-cos-as-sec-cos, set-cos-transmit, set-sec-cos-transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this two-rate form of the police command, the conform action defaults to send, the exceed action defaults to drop, and the violate action defaults to drop. These actions can be set with this command once the style has been configured. Format Mode police-two-rate { conform-action {drop | set-cos-as-sec-cos | set-cos-transmit | set-sec-cos-transmit | set-prec-transmit | set-dscp-transmit | transmit} exceed-action {drop | set-cos-as-sec-cos | set-cos-transmit | set-sec-cos-transmit | set-prec-transmit | set-dscp-transmit | transmit} violate-action {drop | set-cos-as-sec-cos | set-cos-transmit | set-sec-cos-transmit | set-prec-transmit | set-dscp-transmit | transmit}} Policy-Class-Map Config policy-map This command establishes a new DiffServ policy. The parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is specific to the inbound traffic direction as indicated by the in parameter Note: The CLI mode is changed to Policy-Map Config when this command is successfully executed. Format Mode policy-map [in|out] Global Config Quality of Service (QoS) Commands 462