Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 254

ProSafe Managed Switch show ip vlan This command displays the VLAN routing information for all VLANs with routing enabled. Format Modes show ip vlan • Privileged EXEC • User EXEC Term Definition MAC Address used by Routing VLANs The MAC Address associated with the internal bridge-router interface (IBRI). The same MAC Address is used by all VLAN routing interfaces. It will be displayed above the per-VLAN information. VLAN ID The identifier of the VLAN. Logical Interface The logical unit/slot/port associated with the VLAN routing interface. IP Address The IP address associated with this VLAN. Subnet Mask The subnet mask that is associated with this VLAN. Virtual Router Redundancy Protocol Commands This section describes the commands you use to view and configure Virtual Router Redundancy Protocol (VRRP) and to view VRRP status information. VRRP helps provide failover and load balancing when you configure two devices as a VRRP pair. ip vrrp (Global Config) Use this command in Global Config mode to enable the administrative mode of VRRP on the router. Default Format Mode none ip vrrp Global Config no ip vrrp Use this command in Global Config mode to disable the default administrative mode of VRRP on the router. Format Mode no ip vrrp Global Config Routing Commands 254