Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 515

ProSafe Managed Switch • show version • show sysinfo • show port all • show isdp neighbors • show logging • show event log • show logging buffered • show trap log Format Mode show tech-support Privileged EXEC terminal length Use this command to set the number of lines of output to be displayed on the screen, i.e. pagination, for the show running-config and show running-config all commands. The terminal length size is either zero or a number in the range of 5 to 48. After the user-configured number of lines is displayed in one page, the system prompts the user "--More-- or (q)uit." Press q or Q to quit, or press any key to display the next set of lines. The command terminal length 0 disables pagination and, as a result, the output of the show running-config command is displayed immediately. Default Format Mode 24 lines per page terminal length Privileged EXEC no terminal length Use this command to set the terminal length to the default value. Format Mode no terminal length Privileged EXEC show terminal length Use this command to display the value of the user-configured terminal length size. Format Mode show terminal length Privileged EXEC Utility Commands 515