Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 237

ProSafe Managed Switch show arp switch This command displays the contents of the switch's Address Resolution Protocol (ARP) table. Format Mode show arp switch Privileged EXEC Term IP Address MAC Address Interface Definition The IP address of a device on a subnet attached to the switch. The hardware MAC address of that device. The routing unit/slot/port associated with the device's ARP entry. IP Routing Commands This section describes the commands you use to enable and configure IP routing on the switch. routing This command enables IPv4 and IPv6 routing for an interface. You can view the current value for this function with the show ip brief command. The value is labeled as "Routing Mode." Default Format Mode disabled routing Interface Config no routing This command disables routing for an interface. You can view the current value for this function with the show ip brief command. The value is labeled as "Routing Mode." Format Mode no routing Interface Config ip routing This command enables the IP Router Admin Mode for the master switch. Format Mode ip routing Global Config Routing Commands 237