HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 105
Bring up GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 again., control VLAN.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
[DeviceC-GigabitEthernet1/0/1] undo stp enable [DeviceC-GigabitEthernet1/0/1] port link-type trunk [DeviceC-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/1] quit [DeviceC] interface gigabitethernet 1/0/2 [DeviceC-GigabitEthernet1/0/2] shutdown [DeviceC-GigabitEthernet1/0/2] undo stp enable [DeviceC-GigabitEthernet1/0/2] port link-type trunk [DeviceC-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/2] quit # Create smart link group 1, and configure all VLANs mapped to MSTI 1 as the protected VLANs. [DeviceC] smart-link group 1 [DeviceC-smlk-group1] protected-vlan reference-instance 1 # Configure GigabitEthernet 1/0/1 as the master port and GigabitEthernet 1/0/2 as the slave port for smart link group 1. [DeviceC-smlk-group1] port gigabitethernet1/0/1 master [DeviceC-smlk-group1] port gigabitethernet1/0/2 slave # Enable flush message sending in smart link group 1, and configure VLAN 10 as the transmit control VLAN. [DeviceC-smlk-group1] flush enable control-vlan 10 [DeviceC-smlk-group1] quit # Bring up GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 again. [DeviceC] interface gigabitethernet 1/0/1 [DeviceC-GigabitEthernet1/0/1] undo shutdown [DeviceC-GigabitEthernet1/0/1] quit [DeviceC] interface gigabitethernet 1/0/2 [DeviceC-GigabitEthernet1/0/2] undo shutdown [DeviceC-GigabitEthernet1/0/2] quit 2. Configure Device D: # Create VLANs 1 through 30, map these VLANs to MSTI 1, and activate the MST region configuration. system-view [DeviceD] vlan 1 to 30 [DeviceD] stp region-configuration [DeviceD-mst-region] instance 1 vlan 1 to 30 [DeviceD-mst-region] active region-configuration [DeviceD-mst-region] quit # Shut down GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2, disable the spanning tree feature on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 separately, configure them as trunk ports, and assign them to VLANs 1 through 30. [DeviceD] interface gigabitethernet 1/0/1 [DeviceD-GigabitEthernet1/0/1] shutdown [DeviceD-GigabitEthernet1/0/1] undo stp enable [DeviceD-GigabitEthernet1/0/1] port link-type trunk [DeviceD-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceD-GigabitEthernet1/0/1] quit [DeviceD] interface gigabitethernet 1/0/2 98